H. Kuhnke Ltd, Andover, UK
Tel: +44 (0)1264 364194 Email Us

Airbox. The Kuhnke Asi Pneumatic Slave Module

Profibus Valve Islands

Kuhnke can supply pneumatic valve islands with integral Profibus DP or CANopen communications. Kuhnke valve islands are custom built to meet your specific requirements.

Pneumatics:

• From the Kuhnke standard LPP700 range
• Any mix of valves, up to 22 coils per valve island
• 5/2 monostable, or bistable with/without priority
• 5/3 all ports closed/open/pressurised
• 3/2 double valves, normally closed or normally open
• 15mm body width LPP770 (600-800NL/mm)
• 18mm body width LPP772 (700-1200NL/mm)
• External pilot versions for lower pressures and soft start

Electronics:

• Profibus DP or CANopen bus interface
• Profibus DP slave supports 12Mbit/sec baud rate

Assembly:

• IP65 CE marked
• Din rail mounted

 

Inputs:

Kuhnke valve islands are stand alone slaves configured as digital outputs, custom built without inputs. A separate slave (from the Kuhnke 690 / 691 PLC range) should be used for the inputs. Typically there are 2 inputs for every output, but that is just a guide figure. The number of inputs associated with a Kuhnke valve island might be anything between 4 and 44. A Kuhnke PLC is available with 8DI, 16DI or 32DI with extension modules available.

• Profibus DP slaves 12 Mbaud (690 series)
• CANopen slaves (691 series)
• Various standard units up to 32DI
• Digital and analogue versions
• Plug on expansion modules

Your combination of Kuhnke Profibus or CANopen valve islands and separate input slaves will be a highly flexible solution to your network application. Please contact H. Kuhnke Ltd for more information.